Takeuchi TB 250 - Removing the Dozer Blade

4-44
4
ATTACHMENTS
DISASSEMBLY AND ASSEMBLY
Removing the dozer blade
Lower the dozer blade fully to the ground.
1. Disconnect the hydraulic hoses (1) from the blade cyl-
inder (2).
2. Suspend the blade cylinder (2) temporarily, pull out the
pins (3) and (4), and then remove the blade cylinder
(2).
Blade cylinder: 41 kg
3. Suspend the blade (5) temporarily, pull out the pin (6)
and then remove the blade (5).
Blade: 201 kg








