1-3
1
SAFETY PRECAUTIONS
SAFETY
SAFETY PRECAUTIONS
Observe all safety rules
• Operation, inspection and maintenance of this machine
must be performed only by a trained and qualified per-
son.
• All rules, regulations, precautions and safety procedures
must be understood and followed when performing op-
eration, inspection and maintenance of this machine.
• Do not perform any operation, inspection or mainte-
nance
of this machine when under the influence of alco-
hol, drugs, medication, fatigue or insuf
ficient sleep.
Wear safe clothing and protective gear
• Do not wear loose clothing or any accessory that can
catch on the controls or the moving parts of the ma-
chine.
• Do not wear clothing stained with oil or grease that can
easily catch fire.
• Wear protective gear such as helmet, safety shoes, pro-
tective
goggles, respirator, gloves and earmuffs, as ap-
pr
opriate, depending on the work involved. Especially
make sure to wear protective eye-wear and mask when
working with a grinding/polishing/sanding machine,
hammer or compressed air, as metal fragments or other
objects could scatter in such an environment.
• Wear hearing protectors when operating the machine.
Loud and prolonged noise can damage or destroy your
hearing.
Install an extinguisher and a first aid kit
• Install an extinguisher to fight a fire, and learn how to use
it.
• Prepare a first aid kit and keep it at a designated place.
• Decide on the procedures to be used in case of fire or
other hazards.
• Decide on and take note of the contact(s) in case of
emergency.
Place a “Do not operate” alert sign
Serious injury or death may result if an unauthorized person
starts the engine or touches the controls during inspection
or maintenance.
• Before performing maintenance, stop the engine, re-
move the key and stor
e it in a safe place.
• Prominently display a “Do not operate” alert sign on
places such as the starter switch and the control lever.
Place another sign outside of the machine as neces-
sary.
Use the correct tools
Do not use damaged or weakened tools or tools designed
for other purposes. Use only the correct tools for the work
involved.
To Next Page
Loading...
Need help?
General
