Takeuchi TB 250 - Exchanging between Rubber Crawlers and Steel Crawlers

4-17
4
TRAVEL SYSTEM
DISASSEMBLY AND ASSEMBLY
Exchanging between rubber crawlers and
steel crawlers
Required parts
WARNING
If you must work beneath the raised machine or equip-
ment, always use wood blocks, jack stands or other
rigid and stable supports. Never get under the machine
or working equipment if they are not sufficiently sup-
ported.
Refer
to the previous page for removing and installing the
crawler belt.
1. Remove the track roller.
“Removing the track roller”
2. Insert the spacer (1) between the carrier roller bracket
and the frame, and then install the track roller.
“Installing the track roller”
3. Install the guide (3) on the idler side of the frame and
secure the guide (3) using the washer (5) and the bolt
(4).
“Installing the track roller”
Item Part No. Name Quantity
1 03913-00400 Spacer 20
2 11010-51255 Bolt 40
3 04610-00700 Guide 4
4 11010-41230 Bolt 12
5 11400-20012 W
asher 12



4C0AH02Z
5
3
4
3