4-43
4
ATTACHMENTS
DISASSEMBLY AND ASSEMBLY
Removing the swing bracket
1. Suspend the boom cylinder (1) temporarily, pull out the
pin (2) and then remove the boom cylinder.
Boom cylinder: 58 kg
2. Remove the blade (3) from the swing bracket (4).
3. Pull out the pin (5) and remove the swing cylinder (6)
from the swing bracket (4).
4. Suspend the swing bracket (4) temporarily, pull out the
pins (7) and (8), and then remove the swing bracket.
• Be careful not to damage the hoses.
Swing bracket: 135 kg
Installing the swing bracket
For installation of the swing bracket, follow the same pro-
cedure as for removal in the reverse order.
• When assembling, be sure to apply NEVER SEEZ (anti-
seize and lubricating agent) to the pin holes for installing
the swing bracket, and then install the pins (8) and (7).
To Next Page
Loading...
