EasyManuals Logo

Takeuchi TB 250 User Manual

Takeuchi TB 250
352 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
2-9
2
SERVICE DATA
Part Type
Type by air temperature
-20 -10
0 10 20
30 40°C
When to change/
r
eplenish
Capacity
Engine oil pan
Diesel engine oil
API: CD class
ACEA-E3,
E-4 or
E-5
Every
250 hrs after
the first 50 hrs
Upper limit 7.4 L
Lower limit 4.0 L
SAE 10W-30
SAE 15W-40
Hydraulic oil tank
T
akeuchi genuine
hydraulic oil 46
Every 4000 hrs***
T
otal amount of oil:
88 L
T
ank capacity:
52 L
ISO VG46
Anti-wear
hydrau-
lic oil
Every 2000 hrs***
ISO VG32
ISO VG46
ISO VG68
Engine
cooling
system
Cooling water
(water + coolant)**
SAE-J814C, J1941,
J1034 or J2036
ASTM-D6210 or
D4985 (USA)
Every 1000 hrs 12.4 L
Mixture of 50% coolant
Mixture of 30% coolant
Travel reduction
gear
Gear oil
API: GL-4
SAE 90
Every 1000 hrs after
the first 250 hrs*
0.8 L
Carrier roller
Gear oil
API: GL-4
SAE 90 –– 0.060 L
T
rack roller
Mobil oil
SHC 680
–– –– 0.065 L
Idler
Gear oil
API: GL-4
SAE 90 –– 0.070 L
Slew bearing
Lithium gr
ease
EP-2
NLGI No.2
––
Every 50 hrs
As required
Working equip-
ment
Daily or every
10 hrs
Levers When r
equired
LUBRICANT AND FUEL CHART
Select the appropriate fuel, lubricant and grease according to the temperature by referring to the table below.
Regardless of the specified time, change the oil if it becomes too dirty or degraded.
When refilling, never mix oils of different brands. If a brand is to be changed, replace the whole fuel/oil.
* If the ratio of traveling time to total operating time is high, replace the gear oil earlier than the specified time.
** For water, use tap water (soft). Do not use well or river water.
When the ambient temperature drops below 0°C, add coolant (antifreeze). Follow the coolant manufacturer’s instruc-
tions to determine the mixtur
e ratio.
*** The replacement interval for hydraulic oil depends on the oil type being used. New machines are shipped from the fac-
tory
with the Takeuchi genuine hydraulic oil 46. This manual describes when to replace the hydraulic oil assuming that
this Takeuchi oil 46 is used. When a conventional antiwear hydraulic oil is used, replace it every 2000 hours.
LUBRICANT FUEL AND CHART

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Takeuchi TB 250 and is the answer not in the manual?

Takeuchi TB 250 Specifications

General IconGeneral
BrandTakeuchi
ModelTB 250
CategoryCompact Excavator
LanguageEnglish

Related product manuals