4-26
4
UPPER FRAME
DISASSEMBLY AND ASSEMBLY
1. Disconnect the battery ground cable from the battery
terminal.
2. Remove the engine hood (1).
a. Open the engine hood and suspend it temporarily.
b. Disconnect the electric wiring of the taillight.
c. Remove the stay damper (13).
3. Remove the center cover (7).
4. Remove the side covers R (3) and L (4).
5. Remove the fixing bolts. Remove the rod (14), discon-
nect the light wiring and detach the fr
ont cover (6).
6. Remove the tool box (17).
7. Remove the side frames R (15) and L (16).
8. Remove the undercover (18).
Installing the covers
For installation of the covers, follow the same procedure as
for removal in the reverse order.
• When assembling, be sure to leave a 2 mm clearance
between the stay damper and the stay damper fixing
bolt.
To Next Page
Loading...
