Takeuchi TB 250 - Page 261

4-156
4
TRAVEL MOTOR
DISASSEMBLY AND ASSEMBLY
14. Mount the snap ring and secure the cover.
• Set a flat head screwdriver to the edge of the snap
ring and hammer it in around its circumference.
15. Mount an O-ring on the plug (G3/8) and install it on the
cover.
Plug: 46 to 51 N·m
16. Attach the O-ring on the plug (G3/8) and install it on the
cover.
Plug: 12 to 18 N·m


