4-174
4
SLEW MOTOR
DISASSEMBLY AND ASSEMBLY
6. Install the inner race (17), needle (16) and planetary
gear B (15) on the carrier 2 (13).
7. Install the thrust plate (14) on the carrier 2 (13) and
secure it with the cap screws.
Apply Loctite #242 to the cap screws.
Cap screw: 6.1 ±2.0 N·m
8. Install the carrier 2 (13) on the housing.
9. Install the sun gear (12) and the snap ring (19).
To Next Page
Loading...
