Model: EV8650 Supervisor Functions
TP05413002 Rev. 03 Page 45 of 62
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
guillotine) would be in that printers operator manual. The recommended printer from
Talaris does not have a guillotine fitted.
Use the arrow keys to change the setting on the display indicated by xxx.
Use the numerical keys or arrow keys to enter the setting on the display indicated by
nnn.
Use the numerical or arrow keys to enter the hex number setting on the display indicated
by hh.
To exit the Printer Set-up functions, press the DENOM Key. You will now be asked if you
want to save the settings.
Press the START/STOP to save settings.
Press the DENOM key to exit without saving.
To exit the Supervisor Functions completely, press the DENOM Key. You will now be
asked if you want to save the settings.
Press the DENOM key to exit without saving.
Press the START/STOP key to save settings.
To Next Page
Loading...
