Model: EV8650 Optional Remote Display
TP05413002 Rev. 03 Page 59 of 62
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
Both of these options may be configured in the “Supervisor Functions” (see ”rdiSP
(Remote Display Settings)” on page 56)
5.3 Displaying Large Values
If the count value exceeds the 8 digits available on the display, two overflow dashes will
be shown on both the remote and the EV8650 displays.
The dashes ‘ - - ’ will be shown on the left hand side of the display followed by the lower 6
digits of the count or on the right side preceded by the upper digits. The displays will then
automatically begin to switch between the lower and upper digits of the count.
For example:
If a total value of 212,500,000 was being displayed
The display will switch between “212- -” & “- -500000”.
To Next Page
Loading...
