Model: EV8650 Supervisor Functions
TP05413002 Rev. 03 Page 55 of 62
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
4.2.12 bEEP (Setting The Beeper)
Enables or disables beeper sound for Keypad entry or error control.
Once in Supervisor Mode, use the Left and Right arrow keys to scroll through the
available Supervisor Functions.
Once bEEP oFF is displayed, press the START/STOP key to toggle the Beeper off/on.
To exit the bEEP option and the Supervisor Functions completely, press the DENOM
Key. You will be asked if you want to save the settings.
Press the DENOM key to exit without saving.
Press the START/STOP key to save settings.
1. Display 7. Speed
2. Total 8. Det
3. Mode 9. Clear
4. Batch 10. Right Arrow
5. Start / Stop 11. Denomination
6. Auto 12. Left Arrow
13. Numeric Keypad
1
2
5
67
3
8
4
912 101113
To Next Page
Loading...
