User Manual 1-1
DSC/DSCT series
1. GENERAL SAFETY INFORMATION
All the drives manufactured by TDE MACNO
S.p.A.
of Vicenza which belong to the
DSC
and
DSCT
series
comply with the Low Tension Directive
CEE 73/23
, as amended by the Directive
CEE 93/68
and the
corresponding law of the country of destination.
In their manufacture parts and articles have been applied which comply with the harmonising legislation
EN 60204-1
.
Important safety norms
In the design, installation, starting up, maintenance and checking of the drives the safety and accident
prevention norms must be observed with regard to their specific use.
•
Among others the following norms in particular must be observed :
∗ CEI 64.8
Electrical plant using a nominal voltage not greater than 1000V AC - 1500V DC
∗ CEI EN 60204-1
Machine safety; Electrical equipment in machinery
∗ CEI EN 60146-1-1
∗ LEGISLATIVE DECREE 626/94
Accident prevention legislation
To Next Page
Loading...