TDK-Lambda GH10-100 - Identification Commands; Initialization Commands

85
4.10.4 Identification Commands
IDN?
Query Returns the power supply model identification as an ASCII string (one comma,
no spaces)
Returns
<SRD>
Example
TDK-LAMBDA,G100-50
REV?
Query
Returns the software version as an ASCII string
Returns
<SRD>
Example
G:XX.XXX
SN?
Query
Returns the supply’s serial number. Up to 12 characters in any format
Returns
<SRD>
Example
111111-22222
DATE?
Query
Returns the date of last calibration. Format: yyyy/mm/dd
Returns
<SRD>
Example
2017/12/17
4.10.5 Initialization Commands
CLS
Function
Clear Status. Sets FEVE and SEVE registers to zeroes
Returns
<DSC> OK
ADR <NR1>
Function
Send ‘ADR’ and address (0 to 31) to open a communication channel.
Returns
<DSC> OK
RMT <DSC>
Function Set the power supply control source (front panel or communication) to local,
remote or LLO mode.
Local – Enable front panel control.
Remote – Disable front panel settings change (settings preview only).
LLO – same as Remote + Disable front panel unlock function by front panel.
Change mode by communication or AC recycle.
Parameters
0|1|2 or LOC|REM|LLO
Query
RMT?
Returns
<DSC> LOC|REM|LLO