Overview FS-2700 Owner’s Manual
1-10
Key Function POS Function Description
Exit
In POS mode, this key can be used to clear out
of a modifier screen and remove the menu
item.
NOTE: This key MUST be preset on each POS
keyboard. If it is not, it will not be possible to
exit out of the Edit Keyboard table unless a PC
keyboard is connected to the FS-2700.
Finished Prod
Waste
This key type is used at the beginning of a
transaction to identify it as a waste ticket.
All items entered in the transaction will update
the waste totals.
Foreign Currency
This key type is used to calculate the amount
due on the check in a foreign currency.
Function NLU
(Number Look Up)
Can be used for functions that are not preset
on the keyboards. Index the code for the
function then press
{FUNCTION~NLU}
.
See the table on page 1-20 for a list of oper-
ations that can be done with this key and
codes used with each one.
Guests
This key type is used to enter or change the
number of guests on a check.
Inventory Report
Assign one of the Inventory Reports to a key.
Inventory Rpt NLU
(Number Look Up)
Used to print Inventory Reports from the
keyboard.
Select a report from a list that displays when
the key is pressed, or index the function
number of the report then press
{INV.~REPORT~NLU}
.
Labor Report
Used to assign one of the Labor Reports to a
key.
Labor Report NLU
(Number Look Up)
Used to print Labor Reports from the keyboard.
Select a report from a list that displays, or
index the function number of the report then
press
{LABOR~REPORT~NLU}
.
Hold Order
Used to indicate that the current order should
be held from printing to the remote printers
until the next order is entered.
To Next Page
Loading...
Need help?
General
