TEC FS-2700 - Page 25

FS-2700 Owner’s Manual Overview
1-15
Key Function POS Function Description
System Report
 This key type is used to assign one of the
System Reports to a key.
System Report
NLU
(Number Look Up)
 Used to print a System Report from the
keyboard.
 Select a report from a list that displays when
the key is pressed, or index the function
number of the report then press
{SYSTEM~REPORT~NLU}
.
Table Number
 This key is used to assign a table number to a
check, or change a table number of a check.
∗
In order to use this key type, the Require
Table # flag in the Order Type table must be
set for the current Order Type.
Table Select
 This key is used to preset table numbers for
use when tracking checks by tables.
 A numeric table number is assigned to each
key. Pressing the key assigns that table
number to the check.
Tare
 This key is used to enter a tare table for a
menu item.
Tax Exempt
 This key type is used to remove all sales tax
from the check. All taxable totals are moved to
non-taxable totals.
Tax Exempt
#1 - #8
 These eight function keys are used to remove
sales tax applied to the specified Tax Table.
 Each Menu Item Category is linked to one of
the eight Tax Tables. When a specific Tax
Table is exempt, only the sales tax for items in
that Tax Table are removed.
 The taxable totals for the Tax Table are moved
to non-taxable totals.
Tip
 This key type is used to add a tip or gratuity to
a check.
 To accept the default percentage programmed
in the System Config Table, press
{TIP}
then
{TOTAL}
.
 To override the default, press
{TIP}
, enter the
new $ amount, then press
{TOTAL}
.