To Next Page
J
Jason WaltonSep 23, 2025
Why is no data available on my Tecan Laboratory Equipment?
- AalexanderchristopherSep 23, 2025
This error is displayed when kinetic measurements got aborted and the instrument is set to Spectra Mode.
Why is no data available on my Tecan Laboratory Equipment?
This error is displayed when kinetic measurements got aborted and the instrument is set to Spectra Mode.
Why is no data available for measurement cycle on tecan sunrise RC?
This error is displayed when kinetic measurements got aborted and the instrument is set to Spectra Mode.
What causes transport lost steps error in tecan sunrise RC Laboratory Equipment?
If the transport system on your Tecan Laboratory Equipment has lost steps, it may be because the optical switch within the transport box is broken, or the plate calibration values have been lost. You can see chapter 4.4.6 Plate calibration Duration Test page 4-16.
Why is the lamp high in my Tecan Laboratory Equipment?
If the lamp is too high on your Tecan Laboratory Equipment, it means there's too much light, which can prevent reliable measurements. You can see chapter 4.4.5 Mirror and lamp adjustment.
Why is the lamp low in my Tecan Laboratory Equipment?
If the lamp is too low on your Tecan Laboratory Equipment, it means there's too little light, which can prevent reliable measurements. You can see chapter 4.4.5 Mirror and lamp adjustment.
What causes timeout waiting for transport finished in tecan sunrise RC?
If you get a timeout while waiting for transport to finish on your Tecan Laboratory Equipment, it indicates a problem with the transport system, specifically the transport box or broken optical switches. You can see chapter 7.5 Replacing the Transport Box.
What does timeout waiting for measurement finished mean for Tecan Laboratory Equipment?
If you experience a timeout while waiting for a measurement to finish on your Tecan Laboratory Equipment, it suggests an issue with the transport system, possibly related to the transport box or broken optical switches. You can see chapter 7.5 Replacing the Transport Box.
What to do if no measurement filter defined for tecan sunrise RC?
If no measurement filter is defined in your Tecan Laboratory Equipment, you should check the filter settings.
What to do if no reference filter defined for Tecan Laboratory Equipment?
If no reference filter is defined in your Tecan Laboratory Equipment, you should check the filter settings.
Why can't transport find HOME position on tecan sunrise RC?
If the transport system on your Tecan Laboratory Equipment can't find the HOME position, it's likely due to a broken optical switch within the transport box, or lost plate calibration values. You can see chapter 4.4.6 Plate calibration.
Basic safety precautions for instrument use, including warnings and essential guidelines.
Technical details for general specs, variations, options, and accessories.
Information on connecting the instrument to power and safety warnings.
How to install and use the software for firmware updates.
Utility software for instrument adjustment and calibration.
Detailed explanation of how the optical system functions.
Specs, pinout, RS232 lines for computer communication.
Contents and introduction to the service tool kit.
How to install the software included in the service tool kit.
Introduction to the SUNSET software for calibration.
Information on using QC Pac 2 Service for instrument testing.
General components and installation steps for the barcode upgrade.
Procedures for replacing the lamp and various filter carriages.
How to achieve best performance and check instrument accuracy.
Tips on instrument location and operating procedures for best results.
Procedures for checking instrument precision, accuracy, and linearity.
Table of error codes, texts, possible defective parts, and solutions.
General| Brand | tecan |
|---|---|
| Model | sunrise RC |
| Category | Laboratory Equipment |
| Language | English |
