16
Figure 8: Activation: Router Connection Checklist Screen
2. Follow the instructions on the Router Connection Checklist screen.
3. Tap Next.
The TouchScreen locates all the available wireless routers in range, and displays their MAC
addresses.
Figure 9: Activation: Setting Up for Wi-Fi Screen
Figure 10: Activation: Router Located Screen
4. Check the MAC address for the router/modem to which the TouchScreen must connect (usually
located at the back of the device).
5. Tap the MAC address for the correct router.
6. Tap Next.
The Configuring and Securing the Router screen is displayed as the TouchScreen establishes a
firm connection with the router/modem, the Broadband servers, and the Cellular connectivity
servers.
Home System Installation Guide
To Next Page
Loading...
Need help?
General