Technicolor TCA203 User Manual

Installing the Security System
77
Table 7: Manage Camera Operations
Operation Description
Modify a camera
Change the name identifying each camera in the TouchScreen and the
Subscriber Portal.
Set or modify the zone to which the camera is assigned. When a camera is
assigned to a zone, the camera takes a series of pictures if that zone trips an
alarm.
Delete the camera
from the security
system
Remove a camera from being man-
aged by the TouchScreen (see page
119).
Use these actions in sequence to reset a
sensor’s IP/MAC addresses to factory
default.
Add a camera to the
security system
Add an additional camera to the
TouchScreen – up to six (see page
112).
Replace a camera Swap the current camera with another one (see page 120).
Table 8: Manage Peripheral Operations
Operation Description
Delete a
key fob
Remove a key fob from being able to access
the security system (see page 130).
Use these actions in sequence to reset a
key fob’s details to factory default.
Add a key
fob
Find a new key fob that is available to be
added (see page 130).
Modify a
key fob
Change the name identifying each key fob in the TouchScreen and the Subscriber Portal
(see page 129).
Delete a
key pad
Remove a key pad from being able to access
the security system (see page 138).
Use these actions in sequence to reset a
key pad’s details to factory default.
Add a key
pad
Find a new key pad that is available to be
added (see page 135).
Modify a
key pad
Change the name identifying each key pad in the TouchScreen and the Subscriber Portal
(see page 135).

Technicolor TCA203 Specifications

General

Brand	Technicolor
Model	TCA203
Category	Home Automation
Language	English