Installing the Security System
43
When a camera is assigned to a zone, it takes a series of pictures when an alarm is tripped at that
zone. A camera can be assigned to zones for the following types of sensors: door/window sensor,
motion detector, glass break detector, smoke detector.
Table 4: Associated Zone Menu Options for Cameras
Arming
Mode
Description
Default
Camera
If any door sensor not assigned to a camera trips an alarm, this camera takes a
series of pictures.
Unassigned
to Zone
This camera is not associated with another sensor and it is not the Default camera.
<Security
Zone
Name>
This camera is associated with the selected zone. It takes a series of pictures
automatically when the zone trips an alarm, whether or not the alarm is ultimately
sent to the central monitoring station.
9. Tap the Video Quality field to modify the level of video detail captured by the device.
a. Tap High, Medium or Low. Use a value with a network upload speed that is less than the
recommended upload network speed.
The Adjust Camera Video Quality screen is displayed.
b. To update the upload network speed, tap Run Speed Test.
To Next Page
Loading...
Need help?
General