Installing the Security System
19
Figure 15: Activation: Configuring and Securing Router Scree
5. Tap Next and continue to Completing Activation.
Completing Activation
The Wi-Fi and Cellular Strength screen displays the relative strength of the TouchScreen’s connection to
the router/modem and a GPRS/EDGE receiver.
Figure 16: Activation: Wi-Fi and Cellular Signal Screen
Note: If the router is connected to the TouchScreen by Ethernet, then Wi-Fi is not tested.
1. Tap Next.
The Testing Connectivity screen is displayed.
To Next Page
Loading...
Need help?
General