66
Figure 45: Alarm Testing: Verify Signal Sent to Central Screen
3. Call the provided phone number and give the confirmation information to the representative.
4. When you have confirmed that the test alarm was sent successfully, tap Next.
The Alarm Test Checklist is displayed.
Figure 46: Alarm Testing: Alarm Test Checklist Screen
5. Ensure that all the security zones are not faulted (that is, doors and windows are closed, motion
detectors do not show motion, etc.).
When the security zones are ready for testing, “Ready to Arm” is displayed under the Arm
button.
6. Tap Arm.
The after a ten second Exit Delay period, the button changes to the label System Armed.
Home System Installation Guide
To Next Page
Loading...
Need help?
General