18
Figure 13: Activation: Ethernet Connection Checklist Screen
2. Follow the instructions on the Ethernet Connection Checklist screen.
3. Tap Next.
The Ethernet Adapters screen is displayed. The TouchScreen locates and secures the Ethernet
adapter.
Figure 14: Activation: Ethernet Adapters Screen
4. Wait a few minutes for the router/modem to configure and secure the network.
Note: If the system cannot find the proper router, ensure it has been reset to factory
default.
The Configuring and Securing the Router screen is displayed as the TouchScreen establishes a
firm connection with the router/modem, the Broadband servers, and the Cellular connectivity
servers.
Home System Installation Guide
To Next Page
Loading...
Need help?
General