Technicolor TCA203

To Next Page

To Previous Page

6. Replace the battery cover and the screw.

7. Place the AC power cable through the holes on the sides of the TouchScreen stand.

8. Connect the adapter cable to the back of the TouchScreen.

Home System Installation Guide

Main Page

Overview3
To Set up the Security System in a Customer Premises3
Home Security Configuration3
Installation Tools4
Installing the Security System5
Setting up the Router6
Installing the Technicolor Touchscreen7
Power Supply Ratings10
Activation: Installation Welcome Screen11
Ensure Your Touchscreen Configuration Information Is Correct12
Welcome to Product Activation Screen13
Activating the System14
Connectivity: Connectivity Setup Screen Router/Modem Options15
Activation: Initial Router Configuration, Wireless Router-To-Touchscreen15
Activation: Router Connection Checklist Screen16
Activation: Setting up for Wi-Fi Screen16
Activation: Router Located Screen16
Activation: Configuring and Securing Router Screen17
Activation: Initial Router Configuration, Ethernet Router-To-Touchscreen17
Activation: Ethernet Connection Checklist Screen18
Activation: Ethernet Adapters Screen18
Activation: Configuring and Securing Router Scree19
Completing Activation19
Activation: Wi-Fi and Cellular Signal Screen19
Activation: Testing Connectivity Complete Screen20
Activation: Checking for Firmware Upgrade Screen21
Activation: Enter Activation Code Screen21
Activation: Enter Account Phone Number Screen22
Activation: Activating Touchscreen with Server Screen22
Install Zones and Home Devices Screen23
Adding Panel Interface Modules to the Security System24
Before You Begin24
Install Zones and Home Devices: Choose Sensor Zones and Home Devices to Install Screen24
Settings: Locating Panel Interface Boards Screen25
Settings: Edit Sensor/Zone-Modify Zone Settings Screen26
Adding Sensors to the Security System28
Sensors and Zones: Locating Wireless Sensors Screen29
Sensors and Zones: Wireless Sensors Located Screen30
Sensors and Zones: Configure Wireless Sensors Screen31
Sensors and Zones: Add Sensor/Zone - Modify Screen31
Sensors and Zones: Add Sensor/Zone - Modify Zone Settings Screen32
Security Zone Functions33
Sensors & Zones: Configure Wireless Sensors Screen37
Adding Cameras to the Security System38
Camera: Locating Camera Screen41
Camera: Configuring Camera Screen41
Camera: Edit New Camera Screen42
Edit New Camera Options42
Associated Zone Menu Options for Cameras43
Camera: Adjust Camera Video Quality Screen44
Camera: Camera Wi-Fi Connection Test Screen45
Camera: Adjust Camera Screen45
Troubleshooting the Camera Installation46
Adding Lighting Devices to the Security System47
Adding a Thermostat to the Security System50
Adding Key Fobs to the Security System53
Key Fobs: Locating Key Fobs Screen53
Key Fobs: Wireless Key Fobs Located Screen54
Key Fobs: Configure Wireless Key Fobs Screen55
Adding Key Pads to the Security System57
Adding Sirens to the Security System61
Locating Sirens Screen62
Testing the Alarm Functionality of the Security System65
Alarm Testing: Test Alarm Screen65
Alarm Testing: Verify Signal Sent to Central Screen66
Alarm Testing: Alarm Test Checklist Screen66
Alarm Testing: Alarm Test Screen67
Alarm Testing: Review Alarms Screen68
Setting and Validating the Security Information69
Set Master Code Screen69
Validate Account Information: Getting Account Information from Server Screen70
Validate Account Information: Validate Account Information Screen70
Set Secret Word: Getting Security Secret Word from Server Screen71
Set Secret Word: Set Security Secret Word Screen71
Activation Complete Screen72
Mounting the Sensors74
Configuring the Touchscreen75
Sensor Operations76
Manage Camera Operations77
Manage Peripheral Operations77
Manage Environmental Device Operations78
Activating the Subscriber Portal79
Technician Operations80
Getting Started80
To Access the Installers Settings Menu80
Testing Alarms81
Settings: Alarm Test Options Screen82
Settings: Alarm Test Checklist Screen82
Settings: Alarm Test Screen84
Sensor Testing Operations84
Settings: Review Alarm Screen85
Configuring the Entry/Exit Delay Periods85
Settings: Entry and Exit Delay Screen86
Configuring the Alarm Transmission Delay86
Settings: Alarm Transmission Delay Screen87
Configuring the Swinger Shutdown Feature87
Settings: Swinger Shutdown Settings88
Resetting the Touchscreen to Factory Defaults88
To Activate the System Again90
Checking for New Firmware Updates for the Touchscreen90

Technicolor TCA203 - Page 8

Table of Contents