JOG EXCITE: Service & Maintenance Manual - rev. 1.1
Page 9.1
9. MACHINE CONFIGURATION
9.1. USER MENU CONFIGURATION
The machine configuration procedure is invoked by simultaneously pressing the keys ENTER, ↑,
CLEAR when the machine is in standby mode. The following prompt appears on the LED display:
ENTER PASSWORD:
To access the procedure, insert the password 2406 and press ENTER to confirm. To enter the
password without the numeric keypad, enter one digit at a time using the ↑ and ↓ keys to change
the value and the +/- GOAL keys to scroll to the next character.
At this point the machine display begins showing the current configuration, structured as in the
diagram below:
USER MENU
Language
MAX time
Distance
Pause time
Default age
Default weight
TGS
Custom mess.
Up/Down
Keys
HR
User detect
Default config.
Default time
SN
Format P&P
Default calories
Default distance
Ready2Run
9.1.1. LANGUAGE
After selecting a language from the list of those available, all messages subsequently displayed by
the machine will be in the chosen language. To change the selection, when the LED matrix shows
the current setting: