Technogym JOG EXCITE - Default Age; Default Weight; Default Time

JOG EXCITE: Service & Maintenance Manual - rev. 1.1
Page 9.3
9.1.5. DEFAULT AGE
It is possible to set the default age for a generic user, with values ranging from 10 to 99. To change
the setting, when the LED matrix shows the current setting:
DEFAULT AGE : xx
Press the ENTER key to change the parameter: the current value of the parameter will start to
blink, at this point press the CLEAR key to erase the current value and then enter one digit at a
time using the ↑ and ↓ keys to change the value and the +/- GOAL keys to scroll to the next
character.
Press ENTER to confirm the changes made, and use the + or – speed keys to move to the next or
preceding parameter.
The default value of this parameter is 30.
9.1.6. DEFAULT WEIGHT
It is possible to set the default weight of a generic user in KG, with values ranging from 10 to 999.
To change the setting, when the LED matrix shows the current setting:
DEFAULT WEIGHT : KG xxx
Press the ENTER key to change the parameter: the current value of the parameter will start to
blink, at this point press the CLEAR key to erase the current value and then enter one digit at a
time using the ↑ and ↓ keys to change the value and the +/- GOAL keys to scroll to the next
character.
Press ENTER to confirm the changes made, and use the + or – speed keys to move to the next or
preceding parameter.
The default value of this parameter is 70.
9.1.7. DEFAULT TIME
It is possible to set the default duration of the exercise in minutes, with values ranging from 10 to
999. To change the setting, when the LED matrix shows the current time:
DEFAULT TIME : MIN. xxx
Press the ENTER key to change the parameter: the current value of the parameter will start to
blink, at this point press the CLEAR key to erase the current value and then enter one digit at a
time using the ↑ and ↓ keys to change the value and the +/- GOAL keys to scroll to the next
character.
Press ENTER to confirm the changes made, and use the + or – speed keys to move to the next or
preceding parameter.
The default value of this parameter is 15.