ENGLISH
User’s manual 6 UPS EVO DSP PLUS Modular
3.2 UPS Unpacking
Carefully remove the UPS from its packaging, and carry out a meticulous inspection.
We recommend keeping the original packaging in a secure place, in case you need to send the UPS for
maintenance purposes. In case of transport damage, notify the carrier and dealer immediately.
We advise you to follow the steps below explained:
1. Use a forklift to move the cabinet to installed area. Refer to Figure 3.1. Please make sure the bearing
capacity of forklift is sufficient.
2. Please follow the order in Figure 3.2 to remove carton and foams.
Figure 3.1
To Next Page
Loading...
