Tecnoware EVO DSP PLUS MODULAR - Page 35

ENGLISH
UPS EVO DSP PLUS Modular 29 User’s manual
Table 5-6: SETUP-GENERAL Setting List
Setting Item
Sub Item
Explanation
Model Name
--
Set UPS Name (xxxxxxxxxx).
The max. length is 10 characters.
Language
--
Provides 3 optional LCD languages:
• English (Default)
• Traditional Chinese
• Simplified Chinese
• Deutsch
Time
Adjust Time
Set current date and time.
Format: (yyyy / mm / dd hour: min: sec)
MUST be set after UPS installation
System Installed Date
Set system installed date.
Format: (yyyy / mm / dd)
2015/1/1 (Default)
MUST be set after UPS installation
System Last Maintain
Date
Set system latest maintenance date.
Format: (yyyy / mm / dd)
MUST be set after UPS installation
Battery Installed Date
Set battery installed date.
Format: (yyyy / mm / dd)
MUST be set after UPS installation
Battery Last Maintain
Date
Set battery latest maintenance date.
Format: (yyyy / mm / dd)
MUST be set after UPS installation
Baud Rate
--
Set COM Baud Rate:
• 2400 (Default)
• 4800
• 9600
Audible Alarm
--
Set Audible Alarm:
• Disable
• Enable (Default)
Factory Reset
--
Restore to factory default setting: refer to Table 5-7.
EEPROM Reset
--
Restore EEPROM to default setting: refer to Table 5-7.
EPO Function
--
Set EPO active status:
• Normal Close Active
• Normal Open Active (Default)
Password
--
Set New Password. The default Password is: 0000
Save Settings
--
Save all settings to EEPROM.
Use this feature to save the setting(s) you have done.