4.3.2. Hold
During measurement, press button on the unit for a moment to hold the d measurement
data in display.
If press the button again for a moment, HOLD status is released and present measurement is
displayed.
During Hold , is displayed and present measurement of measurement 1 is displayed in
smaller size.
4.3.3. AutoHold
Pres for a long time for AutoHold, AutoRec mode ON /OFF
When the Mode is ON,
is displayed.
AutoHold function automatically keeps the measurement data which the measurement 1 ( DC
Voltage or AC voltage ) is stabilized over 2 seconds.
4.3.4. AutoRec
AutoRec is activated with AutoHold simultaneously.
During in the mode,
is displayed.
When measurement data enter into Hold, the measurement data is saved
In meter mode, can save max, 1000 of V.A measurements
Save space is displayed on upper display area . [ SAVE 000/1000 ]
To Next Page
Loading...
