Tektronix AFG31000 Series

Operating basics
AFG31000 Series Arbitrary Function Generator User's Manual 49
ArbBuilder settings
You can open previously created waveforms or create a new waveform using the ArbBuilder tool.
When you select the ArbBuilder icon to open ArbBuilder, the following selections are visible at the
bottom of the interface:
 File: Open, save, resample, or create a new standard waveform or a new equation.
 Draw: Create freehand waveforms, draw horizontally and vertically. You can also draw by
points.
 Edit: Edit a waveform.
 Send: Send to the channel that you want to use.
 Exit: Exit ArbBuilder.
Figure 24: ArbBuilder home screen