Commands Listed in Alphabetical Order
Syntax
*STB?
Related Commands
*CLS, DESE, *ESE, *ESR?, EVENT?, EVMsg?, FACtory, *SRE
Returns
<NR1>
Examples
*STB? might return 96 showing that the SBR contains the binary value 01100000.
SYNC:TIMEOUT
This command sets or queries the default synchronization timeout for commands
that rely upon data production by the instrument. The default timeout value of
3 seconds is appropriate f
or most applications, but you might need to adjust this
timeout under the following circumstances:
Slow waveform acquisit
ion rate. The combination of record-length, averaging,
frame-scan, trigger hold-off and trig ger-source repetitive-rate settings can
result in a waveform acquisition time that exceeds the synchronization
timeout. If this is the case, sending a query to the instrument results in a
synchronization timeout before the instrument can produce results.
Custom user conļ¬gurations. Any conļ¬guration that signiļ¬cantly inļ¬uences the
rate at which the instrument produces results can result in a synchronization
timeout. Such conļ¬gurations can include any third-party software that you
install if it consum
es a signiļ¬cant amount of CPU c ycles or system resources.
Group
Miscellaneous
Syntax
SYNC:TIMEOUT <NR1>
SYNC:TIMEOUT?
Related Commands
MEASUrement:ALL:VALue?, MEASUrement:LIST, MEASUrement:
LISTValue?, MEASUrement:MEAS<x>:MAXimum?, MEASUrement:
MEAS<x>:MINimum?, MEASUrement:MEAS<x>:MEAN?,
MEASUrement:MEAS<x>:STDdev?, MEASUrement:MEAS<x>:VALue?,
MEASUrement:MEAS<x>:ALL?, MEASUrement:MEAS<x>:UNIts?,
MEASUrement:MEAS<x>:TYPe
ACQuire:CURRentcount:ACQWfms?, ACQuire:CURRentcount:HISTWfms?,
ACQuire:CURRentcount:HISTHits?, ACQuire:CURRentcount:MASKWfms?,
ACQuire:CURRentcount:MASKSamples?, ACQuire:CURRentcount:
MASKTHits?, ACQuire:CURRentcount:MASKHits<x>?, MASK:COUNt:
TOT al?, MASK:COUNt:WAVeforms?, MASK:COUNt:SAMPles?, MASK:
2-280 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
