Appendix C : P661
6 General-Purpose Logic P robe Information
Safety Summar
y
To avoid potential hazards, use this probe only as specified.
Connect and Disconnect Properly. Connect the probe output to the measurement instrument before connecting
the probe to the circuit under test. Disconnect the probe i nput and the probe ground from the circuit under test before
disconnecti
ng the probe from the measurement instrument.
Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings and markings on the product. Consult
the product manual for further ratings information before making connections to the product.
Do not Operate Without Covers. Do not touch exposed connections and components when power is present.
Avoid Exposed Circuitry. Do not touch exposed connections and components when power is present.
Do Not Operate With Suspected Failures. If you suspect there is damage to this product, have it inspected by
qualified service personnel.
Do Not Operate in Wet/Damp Conditions. Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
Safety
TermsandSymbolsinThisManual.
These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in damage to this product or other property.
Symbols on the Product. This symbol may appear on the product:
MSO4000B and DP O4000B Series Oscilloscopes User Manual 203
To Next Page
Loading...
Need help?
General
