Tektronix MSO4104B User Manual

Installation
Powering off the Oscilloscope
To power off the oscilloscope and remove the power cord:
Functional Check
Perform this quick functional check to verify that your oscilloscope is operating correctly.
1. Connect the oscilloscope power cable
as described in Powering On the
Oscilloscope. (See page 11.)
2. Power on the oscilloscope.
12 MSO4000B and DPO 4000B Series Oscilloscopes User Manual

Tektronix MSO4104B Specifications

General

Brand	Tektronix
Model	MSO4104B
Category	Test Equipment
Language	English