TELEDYNE OLDHAM SIMTRONICS MX32 - Mechanical and Installation Guide; MX32 v2 Controller Installation

MX32v2
ANALOG AND DIGITAL CONTROLLER
USER MANUAL
NP32V2EN
Revision D.0
9
3 Mechanical Installation
3.1 MX32v2 Controller
3.1.1 LocationThe MX32v2 is intended for indoor use only and shall be installed in
premises without explosive atmospheres, away from direct exposure to sunlight, and protected
from humidity, dust, and temperature variations. It shall preferably be located in a monitored
environment (for instance: guardhouse, control room, or instrument room, etc.).
3.1.2 Attachment of the wall enclosureAccess to the controller must be
ensured in order to facilitate adjustments, monitoring, and cabling. A space of 400 mm is
necessary in front of the MX32v2 for opening the door. Use 3 fixing screws 4x25 mm for fixing
the case support.
Figure 4: Dimensions
Figure 5: Fixing the MX32v2