TELEDYNE OLDHAM SIMTRONICS MX32 - Technical Specifications Overview; MX32 v2 Controller Specifications

MX32v2
ANALOG AND DIGITAL CONTROLLER
USER MANUAL
NP32V2EN
Revision D.0
63
11 Technical Specifications
11.1 MX32v2 Controller
Function
Function
Gas Detection Controller
Number of lines
1 or 2 as per model
Display and indicators
Display Back-lit graphic LCD
Status indicators - 7 LEDs for each of the 2 lines
- 1 Power On/Off visual indicator
- 1 General failure indicator
Keys
Selection 5 multifunction soft-touch keys
Alarm release Dedicated soft-touch key
Alarms
Limits Parameter setting by COM 32 application
Indicators 6 status LEDs per line (high- and low-range excess
, Alarm 3,
Alarm 2, Alarm 1, failure)
Internal relay
■
4 fully programmable relays (configuration over COM 32 )
■ 1 failure relay (non configurable)
■ DPCO relays, contact rating: 5A/250Vac-30Vdc
■ Screw terminals. Can accept 2.5 mm² (14AWG) wire