ST Series Power Supply Instruction Manual STANDARD OPERATION
telemark.com 37 of 64 Rev 1.0.0
4 STANDARD OPERATION
This chapter covers the standard operation of the ST Power Supply. It will familiarize
the user with the basic functions and indicators of the HVPS and the ST Controller and
instruct the user in the best operating practices.
4.1 HVPS FUNCTIONS AND INDICATORS
Figure 4-1, HVPS Front Panel Functions
1 – HV OVERVOLTAGE fault indicator
2 – HV OVERCURRENT fault indicator
3 – HV OUT OF REGULATION fault indicator
4 – ARC COUNTER fault indicator
5 – RAIL CURRENT fault indicator
To Next Page
