− Volume:
Defines the loudspeaker volume.
Interpreter Configuration
Defines the number of broadcasted interpretation
channels. A (default) maximum of 16 interpreter
channels can be set.
The amount of available channels can be upgraded
by license to a max of 56 (see also chapter 12.1.5)
Operating Mode
The selection between “stand alone” mode (without
the use of a central unit) and Confidea CU or
TCS5500 CPU can be made.
Note:
If the Confidea wireless system is
connected to a Televic conference system
central unit, the conference mode
settings will be managed from that
central unit.
Reference:
When using Confidea wireless in
conjunction with other Televic
conference systems and PC control
software, please refer to the User
Manual of those systems for more
information on the use and setting of
the various conference modes.
Note:
Choosing a high number of interpretation
channels will limit the number of
maximum microphone channels.
Note:
Although it is possible to select the
highest setting of number of active
microphones together with the highest
number of interpretation channels, it is
advised to use the settings that are not
marked in red!
Using settings marked in red may
influence audio quality and max. reach
To Next Page
Loading...
