NOTES, RESOURCES, ADDITIONAL INFORMATION | 91
Default IP Addresses:
VX Engine ‘Network’ interface = 192.168.2.200 (front panel settable)
VX Engine ‘WAN’ interface IP address: OFF by default, no IP set.
SIP Parameters
Codecs supported as of early 2011: g.711 alaw and ulaw. g.722.
SIP Trunks
SIP Stations
TCP/IP Ports and protocols used by the VX System
♦ 80 HTTP (TCP/Network Port only)
♦ 22 SSH (TCP)
♦ 5004 used internally by DSP engine (UDP)
♦ 5060 SIP (UDP)
♦ 8080 HTTP (TCP/WAN Port only)
♦ 20518 Livewire ports
♦ 62000 through 62513 RTP (UDP)
♦ Port numbers may be changed on the WAN interface for security and flexibility.
VSet telephone
VSet Telephone default IP address: 192.168.0.201 (front panel settable)
Default username and password:
username = user
password = <blank>
telnet requires no password
TCP/IP Ports and protocols used by the VSet Telephone:
80 HTTP (TCP/Network Port only)
23 Telnet (TCP)
20518 Livewire port
Power Over Ethernet (PoE)
The VSet uses standard 802. Power Over Ethernet (POE) and consumes 15.4 watts Please
consider this relatively high power consumption rate when choosing your POE source.
To Next Page
Loading...