105
Step 2 Configure the Router 2.
1. Start a web browser on a device connected to the router 2 and visit tendawifi.com to log
in to the web UI of the router.
2. Choose IPv6.
3. Enable the IPv6 function.
4. Set the connection type to 6in4 Tunnel.
5. Enter the WAN IPv4 address of the device at the peer side, which is 1.1.1.1 in this
example.
6. Customize the local IPv6 address, which is 2001:10::2/64 in this example.
7. Set the IPv6 LAN prefix length, which is 2001:2::/64 in this example.
8. Click Save.
To Next Page
Loading...
