Tenda AC1200 - Connect Devices to the Wi-Fi Network Using the PIN Code of the Router

59
5.6.4 Connect devices to the Wi-Fi network using the PIN code
of the router
The router only supports WPS connection by entering the PIN code on wireless devices, which is
usually used on Wi-Fi network adapters. Please refer to the user guide of the Wi-Fi network adapter
for configuration details.
Configuring procedure:
Step 1 Find the PIN code of the router by logging in to the web UI of the router, and navigate to
Wi-Fi Settings > WPS. The PIN code is shown under Method 2.
Step 2 Enter the PIN code on the wireless device that supports WPS connection using the PIN
code.
---End
Wait a moment until the WPS negotiation is completed, and the wireless device is connected to
the Wi-Fi network.