Tenda AC1200 User Manual

26
4.1.2 Create an APN profile mannully to access the internet
If the router cannot identify APN parameters automatically and access the internet, you can add a
new APN profile manually for dial-up. Contact your ISP for these parameters.
Configuring procedure:
Step 1 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 2 Choose Internet Settings.
Step 3 Click Create a Profile.
Step 4 Enter required parameters inquired from your ISP.
Step 5 Click Save.
---End
Wait a moment; the router will use the parameters you entered to dial up for internet access.
When the Connected is shown after Internet Status, you can access the internet with the APN
profile you create.

Tenda AC1200 Specifications

General

Data Transfer Rate	1200Mbps
Wireless Standard	IEEE 802.11ac/a/n 5GHz, IEEE 802.11b/g/n 2.4GHz
Frequency Bands	2.4GHz, 5GHz
Wireless Speed	300Mbps (2.4GHz) + 867Mbps (5GHz)
Antenna	4 x 5dBi external antennas
Security	WPA/WPA2-PSK
Button	WPS button, Reset button
DHCP Server	Support