Tenda AC1200 User Manual

52
5.4 Channel & bandwidth
In this section, you are allowed to change network mode, wireless channel, and wireless
bandwidth of 2.4 GHz and 5 GHz Wi-Fi networks.
To access the configuration page, log in to the web UI of the router, and choose Wi-Fi Settings >
Channel & Bandwidth.
In order not to influence the wireless performance, it is recommended to maintain the default settings
on this page without professional instructions.
Parameter description
Parameter
Description
Network
Mode
It specifies various protocols adopted for wireless transmission.
2.4 GHz Wi-Fi network supports 11n, 11b/g mixed and 11b/g/n mixed modes.

11n: It indicates that devices compliant with IEEE 802.11n protocol can connect to the 2.4 GHz
Wi-Fi network of the router.

11b/g mixed: It indicates that devices compliant with IEEE 802.11b or IEEE 802.11g protocol
can connect to the 2.4 GHz Wi-Fi network of the router.

11b/g/n mixed: It indicates that all devices can connect to the router if they are compliant with
IEEE 802.11b or IEEE 802.11g protocol, or work at 2.4 GHz with IEEE 802.11n protocol

Tenda AC1200 Specifications

General

Data Transfer Rate	1200Mbps
Wireless Standard	IEEE 802.11ac/a/n 5GHz, IEEE 802.11b/g/n 2.4GHz
Frequency Bands	2.4GHz, 5GHz
Wireless Speed	300Mbps (2.4GHz) + 867Mbps (5GHz)
Antenna	4 x 5dBi external antennas
Security	WPA/WPA2-PSK
Button	WPS button, Reset button
DHCP Server	Support