Tenda AC1200 User Manual

169
12.4 Time settings
To access the configuration page, log in to the web UI of the router, and choose System Settings >
Time Settings.
You can change the time settings on this page. The functioning of functions based on time requires
an accurate system time. The system time of the router can be synchronized with the internet or
set manually. By default it is synchronized with the internet.
12.4.1 Sync system time with the internet time
Under this mode, the router will automatically sync its time with the internet time when it is
connected to the internet. You can also choose the time zone to be synchronized.
12.4.2 Set the time manually
When the system time is set to Manual, you can enter a desired time or sync the system time of
the router with the device that is configuring the router. Besides, you need to correct it every time
after you reboot the router in order to ensure the accuracy of system time.

Tenda AC1200 Specifications

General

Data Transfer Rate	1200Mbps
Wireless Standard	IEEE 802.11ac/a/n 5GHz, IEEE 802.11b/g/n 2.4GHz
Frequency Bands	2.4GHz, 5GHz
Wireless Speed	300Mbps (2.4GHz) + 867Mbps (5GHz)
Antenna	4 x 5dBi external antennas
Security	WPA/WPA2-PSK
Button	WPS button, Reset button
DHCP Server	Support