Tenda AC1200 User Manual

35
Step 4 Customize the Wi-Fi Name and Wi-Fi Password of each Wi-Fi network.
Step 5 Click Save.
---End
When completing the configurations, you can connect to the Wi-Fi networks of the router to
access the internet.
5.1.3 Change the Wi-Fi name and Wi-Fi password
The router supports both 2.4 GHz and 5 GHz Wi-Fi networks.
Assume that you want to change the 2.4 GHz Wi-Fi name and password to John_Doe_2.4GHz and
Tenda+Wireless24, and the 5 GHz Wi-Fi name and password to John_Doe_5GHz and
Tenda+Wireless5. Both networks adopt WPA/WPA2-PSK (recommended) as the encryption type.
Configuring procedure:
Step 1 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 2 Choose Wi-Fi Settings > Wi-Fi Name & Password.
Step 3 Disable Unify 2.4 GHz & 5 GHz.
Step 4 Change the parameters of the 2.4 GHz network.
1. Change the Wi-Fi Name of the 2.4 GHz network, which is John_Doe_2.4GHz in this
example.

Tenda AC1200 Specifications

General

Data Transfer Rate	1200Mbps
Wireless Standard	IEEE 802.11ac/a/n 5GHz, IEEE 802.11b/g/n 2.4GHz
Frequency Bands	2.4GHz, 5GHz
Wireless Speed	300Mbps (2.4GHz) + 867Mbps (5GHz)
Antenna	4 x 5dBi external antennas
Security	WPA/WPA2-PSK
Button	WPS button, Reset button
DHCP Server	Support