Tenda AC1200 User Manual

42
Parameter
Description
referring to the configuring procedures in Access the internet through the WAN port
according to the connection type you choose.
Upstream Wi-Fi
Name
It specifies the Wi-Fi name that you want to bridge. If you choose Enter a Wi-Fi name
manually, you are required to enter the Wi-Fi Name, Frequency Band and Encryption
Mode, Encryption Algorithm and Upstream Wi-Fi Password manually.
Upstream Wi-Fi
Password
It specifies the Wi-Fi password of the Wi-Fi name that you want to bridge.
5.3.2 Extend the existing Wi-Fi network
When there is already a router with internet access in your home, you can refer to the
configurations in this part to extend the Wi-Fi network coverage.
Assume that your existing Wi-Fi name and password are:
− Upstream Wi-Fi name: Home_Wi-Fi
− Wi-Fi password: 12345678
New router
Original router

Tenda AC1200 Specifications

General

Data Transfer Rate	1200Mbps
Wireless Standard	IEEE 802.11ac/a/n 5GHz, IEEE 802.11b/g/n 2.4GHz
Frequency Bands	2.4GHz, 5GHz
Wireless Speed	300Mbps (2.4GHz) + 867Mbps (5GHz)
Antenna	4 x 5dBi external antennas
Security	WPA/WPA2-PSK
Button	WPS button, Reset button
DHCP Server	Support