EasyManuals Logo

Tenda AC1200 User Manual

Tenda AC1200
207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #170 background imageLoading...
Page #170 background image
161
12 System settings
12.1 LAN settings
To access the configuration page, log in to the web UI of the router, and choose System Settings >
LAN Settings.
On this page, you can:
Change the LAN IP address and subnet mask of the router.
Change the DHCP server parameters of the router.
The DHCP server can automatically assign IP address, subnet mask, gateway and other
information to clients within the LAN. If you disable this function, you need to manually
configure the IP address information on the client to access the internet. Do not disable the
DHCP server function unless necessary
Configure the DNS information assigned to clients.
Parameter description
Parameter
Description
LAN IP Address
It specifies the LAN IP address of the router, which is also the management IP
address for logging in to the web UI of the router.
Subnet Mask
It specifies the subnet mask of the LAN port, used to identify the IP address range
of the local area network.

Table of Contents

Other manuals for Tenda AC1200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda AC1200 and is the answer not in the manual?

Tenda AC1200 Specifications

General IconGeneral
Data Transfer Rate1200Mbps
Wireless StandardIEEE 802.11ac/a/n 5GHz, IEEE 802.11b/g/n 2.4GHz
Frequency Bands2.4GHz, 5GHz
Wireless Speed300Mbps (2.4GHz) + 867Mbps (5GHz)
Antenna4 x 5dBi external antennas
SecurityWPA/WPA2-PSK
ButtonWPS button, Reset button
DHCP ServerSupport

Related product manuals