Tenda AC1200 - PPTP;L2 TP Client; Overview

89
9.3 PPTP/L2TP client
9.3.1 Overview
This router can function as a PPTP/L2TP client and connect to PPTP/L2TP servers.
The PPTP/L2TP client function is disabled by default. When it is enabled, the page is show as
below.
Parameter description
Parameter
Description
PPTP/L2TP Client
It is used to enable or disable the PPTP/L2TP client function.
Client Type
It is specifies the client type that the router serves as, either PPTP or L2TP.

PPTP: When the router is connecting to a PPTP server, choose this option.

L2TP: When the router is connecting to a L2TP server, choose this option.
Server IP
Address/Domain
Name
It specifies the IP address or domain name of the PPTP/L2TP server that the router
connects to. Generally, when a router serves as the PPTP/L2TP server at the peer side,
the domain name or IP address should be that of the WAN port whose PPTP/L2TP server
function is enabled.
User Name
It specifies the user name and password that the PPTP/L2TP server assigns to the
PPTP/L2TP clients.
Password
Status
It specifies the connection status of the VPN connection.