Tenda AC1200 User Manual

174
12.7.2 Local upgrade
In order to prevent the router from being damaged:

Ensure that the firmware is applicable to the router.

It is recommended to upgrade the firmware by connecting a LAN port to a computer and
performing the upgrade on the web UI.

When you are upgrading the firmware, do not power off the router.
Step 1 Go to www.tendacn.com. Download an applicable firmware of the router to your local
computer and unzip it.
Step 2 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 3 Choose System Settings > Firmware Upgrade
Step 4 Choose Local Upgrade.
Step 5 Click Choose File.
Step 6 Target the firmware file downloaded previously (extension: bin), and click Open.

Tenda AC1200 Specifications

General

Data Transfer Rate	1200Mbps
Wireless Standard	IEEE 802.11ac/a/n 5GHz, IEEE 802.11b/g/n 2.4GHz
Frequency Bands	2.4GHz, 5GHz
Wireless Speed	300Mbps (2.4GHz) + 867Mbps (5GHz)
Antenna	4 x 5dBi external antennas
Security	WPA/WPA2-PSK
Button	WPS button, Reset button
DHCP Server	Support