74
7 Guest network
7.1 Overview
In this module, you can enable/disable the guest network function and change the Wi-Fi name and
password of the guest network.
A guest network can be set up with a shared bandwidth limit for visitors to access the internet, and
isolated from the main network. It protects the security of the main network and ensures the
bandwidth of your main network.
To access the configuration page, log in to the web UI of the router and navigate to the Guest
Network. This function is disabled by default.
Parameter description
It is used to enable or disable the guest network function.
It specifies the Wi-Fi name of the router’s guest network. By default, Tenda_VIP is for the
2.4 GHz Wi-Fi network and Tenda_VIP_5G for the 5 GHz Wi-Fi network.
You can change the SSIDs (Wi-Fi names) as required. To distinguish the guest network
from the main network, you are recommended to set different Wi-Fi network names.
It specifies the password for the router’s two guest networks.
To Next Page
Loading...
Need help?
General
