Tenda AC1200 - Wps; Overview; Connect Devices to the Wi-Fi Network Using the WPS Button

55
5.6 WPS
5.6.1 Overview
The WPS function enables wireless devices, such as smartphones, to connect to Wi-Fi networks of
the router quickly and easily.
To access the configuration page, log in to the web UI of the router, and choose Wi-Fi Settings >
WPS.
This function is only applicable to WPS-enabled wireless devices.
5.6.2 Connect devices to the Wi-Fi network using the WPS
button
Configuring procedure:
Step 1 Find the RST/WPS button on the rear panel of the router, and hold it down for 1 to 3
seconds. The Wi-Fi indicator blinks slow.
Step 2 Configure the WPS function on your wireless devices within 2 minutes. Configurations on
various devices may differ (Example: HUAWEI P10).
1. Find WLAN settings on the phone.
2. Tap , and choose WLAN settings.