Tenda AC1200 - Access Internet Through WAN Port; Access Internet with PPPoE Account

27
4.2 Access the internet through the WAN port
If you want to connect your broadband to the router to access the internet, you can set the router
to wireless router mode (refer to Operating mode) and access the internet through the WAN port.
Parameters for accessing the internet are provided by your ISP. Contact your ISP for any doubt.
4.2.1 Access the internet with a PPPoE account
If the ISP provides you with PPPoE user name and password, you can choose this connection type
to access the internet. The application scenario is shown below.
Configuring procedure:
Step 1 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 2 Choose Internet Settings.
Step 3 Set Connection Type to PPPoE.
Step 4 Enter the ISP User Name and ISP Password.
Step 5 Click Connect.